Product overview: Fluke 107 Pocket Digital Multimeter The Fluke 107 is a compact, palm size easy-to-use digital multimeter made to fit the way you work. It is the perfect first-pass troubleshooting tool; small enough to fit in a shirt pocket yet tough enough to withstand daily use, including a 1-meter drop test. For everyday applications where true-rms accuracy isn’t needed, the Fluke 107 delivers reliable measurements time after time. With a CAT III 600 V safety rating, you don’t need to compromise safety. The Fluke 107 offers a comfortable grip, weighs only 200 g, and is easy to carry. Fluke 107 measurement test functions AC and DC voltage AC and DC current Resistance Capacitance Diode Frequency and duty-cycle SPECIFICATIONS : Precision specifications AC voltage (40 Hz to 500 Hz)1 Range Resolution Accuracy 6.000 V 60.00 V 600.0 V 0.001 V 0.01 V 0.1 V 1.0 % 3 DC voltage 6.000 V 60.00 V 600.0 V 0.001 V 0.01 V 0.1 V 0.5 % 3 Exchange millivolts 600.0 mV 0.1 mV 3.0 % 3 Diode test2 2.000 V 0.001 V 10 % Resistance (ohm) 400.0 Ω 4.000 kΩ 40.00 kΩ 400.0 kΩ 4.000 MΩ 40.00 MΩ 0.1 Ω 0.001 kΩ 0.01 kΩ 0.1 kΩ 0.001 MΩ 0.01 MΩ 0.5 % 3 0.5 % 2 0.5 % 2 0.5 % 2 0.5 % 2 1.5% 3 Capacitor3 50.00 nF 500.0 nF 5.000 μF 50.00 μF 500.0 μF 1000 μF 0.01 nF 0.1 nF 0.001 μF 0.01 μF 0.1 μF 1 μF 2 % 5 2 % 5 5 % 5 5 % 5 5 % 5 5 % 5 Frequency4 Hz (10 Hz – 100 kHz) 50.00 Hz 500.0 Hz 5.000 kHz 50.00 kHz 100.0 kHz 0.01 Hz 0.1 Hz 0.001 kHz 0.01 kHz 0.1 kHz 0.1 % 3 Duty cycle4 1 % to 99 % 0.10 % 1 % typical case5 AC current (40 Hz – 200 Hz) 4.000 A 10.00 A 0.001 A 0.01 A 1.5 % 3 DC 4.000 A 10.00 A 0.001 A 0.01 A 1.5 % 3 All AC current, frequency, and duty cycle are specified from 1% to 100% of the range. Input values below 1% of range are not specified. Typically, the open circuit test voltage is 2.0 V and the short circuit current is < 0.6 mA. The parameters do not include errors due to test lead capacitance and capacitor substrate (up to 1.5 nF in the 50 nF range). All AC current, frequency, and duty cycle are specified from 1% to 100% of the range. Input values below 1% of range are not specified. Typically, the frequency is 50 Hz or 60 Hz and the duty cycle is 10% to 90%. Features Overload protection Input impedance (nominal value) Common mode rejection ratio Normal mode rejection ratio AC voltage 600 V 1 >10 MΩ <100 pF 2 >60 dB at 50 Hz or 60 Hz at DC current − Exchange millivolts 600 mV >1M, <100 pF >80 dB at 50 Hz or 60 Hz − DC voltage 600 V 1 >10 MΩ <100 pF >100 dB at 50 Hz or 60 Hz at DC current >60 dB at 50 Hz or 60 Hz Up to 6 x 105 V Hz For medium voltage (alternating current), the input impedance is approximately 1 MΩ.
